Rockford Fosgate M2-200X2 Marine 200-Watt 2-Channel Amplifier

Rockford Fosgate M2-200X2 2 Channel 200 Watt Full Range Class D Marine Amplifier

Designed to withstand the elements . the M2-200X2 Element Ready™ amplifier is a 200 watt . full-range class-D model . capable of operating at 4Ω or 2Ω stereo . and 4Ω bridged/mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings . a P.O.W.E.R. Supply that generates more power as voltage increases.

This Listing Includes:
(1) Marine Amplifier
(1) 7 Speaker Input Harness
(1) 3mm Hex Key
(4) 3/4 Screws
(4) Flat Washers

Features:
- Element Ready™ design protects against outdoor exposure
- Conformal coated circuit board protects against dust and water
- UV stable powder coated cast aluminum heatsink
- Zinc Nickel-plated Marine grade brass connection terminals
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Optimized using AudioGraph PowerCube measurement tool
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- Top Mounted Control Panel
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- Short Circuit & Over Current Protection
- Variable Infrasonic Filter
- Integrated Power and Speaker Terminals
- Balanced Differential Inputs eliminates noise picked up by signal cables
- RCA pass-thru outputs
- Integration with OEM and Aftermarket Radios
- Auto-Sense turn-on with remote out (high level in)
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Low Impedance Stability
- Proprietary testing using RATS (Rockford Automated Testing System)
- CEA-2006 Compliant & CE Compliant

Specifications:
Number of Channels: 2
Total Power(Sum of Rated Power): 200 Watts
Bridgeable: Yes
Frequency Response: 20 Hz - 20 kHz
Circuit Topology Class: Class D
Tone Controls: No
Remote Controls: No
Power Wire Gauge: 4 AWG
Power Input Connector: Compression Terminal Block
Speaker Wire Gauge: 8 AWG
Speaker Output Connector: Compression Terminal Block
Cooling: Convection
Operating Voltage: 9 - 16 VDC
Recommended Fuse(not included): 30 A
Max. Current Draw (13.8V Sinewave): 18 A

Rated Power(RMS Continuous Power):
50 Watts x 2 @ 4Ω
100 Watts x 2 @ 2Ω
200 Watts x 1 @ 4Ω Bridged/Mono

Dynamic Power(PVC/PowerCube®):
60 Watts x 2 @ 4Ω
107 Watts x 2 @ 2Ω
215 Watts x 1 @ 4Ω Bridged/Mono

Input Sensitivity:
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V

Total Harmonic Distortion (THD+Noise):
4Ω: Less Than 1.0%
2Ω: Less Than 1.0%

Signal Input:
Low-Level: 2 RCA
High-Level: 4-Pin Molex

Signal Output:
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)

Crossover Controls:
High-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes

Visual Indicators:
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out

Dimensions (HxWxD): 1.9 x 6.8x 8.1<